Search Result

The PR3 lets SoundFX users download new Project sound files and even reflash the sound decoder's firmware for latest updates.

It also acts as a computer interface and LocoNet Translator for your PC.

The PR3 is the most economical computer Interface we offer, it has all the functionality of a PR2 and a MS100 combined in one.

Finally it functions on the more modern USB 2.0 interface making it easier to connect and more friendly to newer PCs.

...

The DT402D is our top-of-the-line, Duplex Radio Super Throttle. The DT402D gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand.

The DT402D super throttle is designed to handle nearly every aspect of layout control.

You can run trains and consist, control up to 30 functions such as sound, program decoders, set up and operate routes, and much more.

The DT402D gives you full Duplex or...

PS2012 Features:

• Operate one or more boosters
• Scale selectable switch for use with N,HO or large scale
• Design Coordinated for use with Digitrax products
• Built-In unit over-curren and over-temp protection
• DC Output Current Ammeter
• On/Off switch
• Integral Cooling fan
• One "Y" cable (p/n YC52) Included for convenience with dual 5 amp protected outputs

​...

​​​​​​

• Supports up to 400 locomotives and throttles.
• On-board USB port.
• Three RJ12 LocoNet ports
• Supports SoundFX and sound decoder programming using Digitrax SoundLoader app over USB.
• 5amp/8amp Booster with multi-scale capability.
• Built-in booster transponding detection provides Operations mode CV read back.
• Locomotive reset button.
• EZ route setup button and system editable routes.
• Improved Programming track.
• Updated design.

​...

More Locos, More power, More Fun!

The DCS100 is a combination DCC Command Station & Booster.

The DCS100 operates as the command station and main system booster on a Digitrax LocoNet system.

The DCS100 Command Station lets your LocoNet System run up to 120 locos and 120 throttles.

Complete with full read/ write programming, route capability, and a separate programming output so you can run and program at the same time.
...

DB100 Features:

• Multi Featured Command Control system when used with CT4
• 4.5 amp Multi-Scale booster
• Intelligent Auto-Reverse
• Accepts AC or DC input
• Over Voltage Protected
• Auto-Resetting over teperature protection
• Auto-Resetting over current protection for short-cicuit protection
• LocoNet
• Auto-Shutdown on loss of command control drive signal
• Dual color LED indicates and diagnoses signals sent to track
• Track OFF switch allows suspension of track power while input

...

Here is the brains of it all, Lighting, block sensory detection...

The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state information to LocoNet. The BXPA1 is silent solid state and uses no mechanical relays for auto-reversing.

• Automatic reversing for one reversing section or sub-district.
• DCC Occupancy Detection for 1 Auto-Reversing Section letting

...

BXP88 makes adding detection and transponding to your layout easier than ever. No more complicated wiring!

• DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section on your layout.
• One Transponding Zone per Detection Section lets you know the location of transponder-equipped locos or rolling stock.
• Intelligent Automatic short-circuit and over-current power management for each Detection

...

• Low-cost, High-sensitivity DCC block-occupancy detection.
• Adjustable resistance/current detection section (DS) trip threshold.
• 8A capacity, suitable for all scales and track wiring configurations.
• Noise resistant and compatible with BDL168 sections.

• On-board status leds for stand-alone occupancy and track power indication, expandable for optional LT5 or fascia mounted occupancy indicator leds.
• Plug and Play connections to simplify setup. Can cascade Booster wires.
• Isolated Occupancy

...

• All plug-in connectors for simple and easy installation and service.
• User defined as 16 DS reporting addresses in 1 to 2000+ DS range.
• Easy setup with device Option Switches (OPSW)
• Powered by 2mm DC jack, 8V min to 22V max.

• Configured to operate with DCC booster power from; DCS52,
DCS100, DCS210, DCS210+, DCS240, DCS240+ Command Stations,
DB210 and DB220 boosters.
• Can split into two 8-DS areas to operate from two separate boosters.
• Optional Detection and Power status led connector

...

​​​​​

• Fully connectorized installation.
• Optional support for DCC 9-Aspect control mode, including Lunars.
• Easy setup with Option Switches and LocoNet programming.
• Configurable for four solenoid or four slow-motion turnout control.
• 8 Input lines for local control and sensors.
• 8 System routes with 8 entries each.
• Advanced LocoNet configuration capability with Series7 style installation support using a DT602.

...