Search Result

The PR3 lets SoundFX users download new Project sound files and even reflash the sound decoder's firmware for latest updates.

It also acts as a computer interface and LocoNet Translator for your PC.

The PR3 is the most economical computer Interface we offer, it has all the functionality of a PR2 and a MS100 combined in one.

Finally it functions on the more modern USB 2.0 interface making it easier to connect and more friendly to newer PCs.

...

The DT402D is our top-of-the-line, Duplex Radio Super Throttle. The DT402D gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand.

The DT402D super throttle is designed to handle nearly every aspect of layout control.

You can run trains and consist, control up to 30 functions such as sound, program decoders, set up and operate routes, and much more.

The DT402D gives you full Duplex or...

SE8C Plug 'N Play Signal Decoder make it easy to add prototypical signaling to your layout.

The SE8C can drive as many as 32 signal heads with many popular LED signal types.

It can also be used to control up to 8 slow motion turnout machines as either turnout control or control for semaphore type signals.

Easy modular Plug 'N Play and additional accessories make it simple to add signaling to your layout.

SE8C Features:

• • Control

...

The BDL168 is a cost effective LocoNet Occupancy Detector for 16 detection sections.

Lets you know when detection sections of your layout are occupied.

When used in conjunction with one or two RX4 transponder detectors it operates up to 8 transponding zones and operations mode read back.

Know what is where on your layout!

BDL History: BDL16 was released in 2000 and was replaced by BDL162 in 2002. An update kit was available...

​​​​​​

• Supports up to 400 locomotives and throttles.
• On-board USB port.
• Three RJ12 LocoNet ports
• Supports SoundFX and sound decoder programming using Digitrax SoundLoader app over USB.
• 5amp/8amp Booster with multi-scale capability.
• Built-in booster transponding detection provides Operations mode CV read back.
• Locomotive reset button.
• EZ route setup button and system editable routes.
• Improved Programming track.
• Updated design.

​...

More Locos, More power, More Fun!

The DCS100 is a combination DCC Command Station & Booster.

The DCS100 operates as the command station and main system booster on a Digitrax LocoNet system.

The DCS100 Command Station lets your LocoNet System run up to 120 locos and 120 throttles.

Complete with full read/ write programming, route capability, and a separate programming output so you can run and program at the same time.
...

• Dual 3/5/8 Amp AutoReversing DCC Booster
• Up to 16 Amps of power total
• N, HO, & Large Scale Operations with Custom Voltage Trim
• LocoNet for easy plug ‘n play installation and system expansion

• Easy dip switch setup
• Auto resetting over temperature and short circuit protection
• Track status indicators
• Stabilized track drive output
• Over-voltage protected
• Auto-Shutdown when command control signal is lost to prevent “runaway” trains
• IPL updatable

...

DB150 Command Station / Booster:

• Full LocoNet Capabilities for easy plug 'n play installation and system expansion
• Run up to 22 locos and 22 throttles in command station mode.
• Provides additional power to run more trains in booster mode.
• Can be used as an Intelligent Auto Reversing Booster
• Use with any LocoNet throttle
• Built in broadcast write only programmer
• Built in 5 Amp Digital Command Control Booster Rated at 80VA.
• Many command station options are user customizable.
• Auto

...

DB100 Features:

• Multi Featured Command Control system when used with CT4
• 4.5 amp Multi-Scale booster
• Intelligent Auto-Reverse
• Accepts AC or DC input
• Over Voltage Protected
• Auto-Resetting over teperature protection
• Auto-Resetting over current protection for short-cicuit protection
• LocoNet
• Auto-Shutdown on loss of command control drive signal
• Dual color LED indicates and diagnoses signals sent to track
• Track OFF switch allows suspension of track power while input

...

BXP88 makes adding detection and transponding to your layout easier than ever. No more complicated wiring!

• DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section on your layout.
• One Transponding Zone per Detection Section lets you know the location of transponder-equipped locos or rolling stock.
• Intelligent Automatic short-circuit and over-current power management for each Detection

...