• ---

  DB150 Command Station / Booster:

  • Created by: Dudicrous
  • Published: 01-24-2026, 07:07 AM
  • 0 comments

  DB150 Command Station / Booster:

  
  
  DB150 Command Station / Booster:

  • Full LocoNet Capabilities for easy plug 'n play installation and system expansion
  • Run up to 22 locos and 22 throttles in command station mode.
  • Provides additional power to run more trains in booster mode.
  • Can be used as an Intelligent Auto Reversing Booster
  • Use with any LocoNet throttle
  • Built in broadcast write only programmer
  • Built in 5 Amp Digital Command Control Booster Rated at 80VA.
  • Many command station options are user customizable.
  • Auto

  ...

  Go to post

• ---

  DB100 Command Control system

  • Created by: Dudicrous
  • Published: 01-24-2026, 07:04 AM
  • 0 comments

  DB100 Command Control system

  
  
  DB100 Features:

  • Multi Featured Command Control system when used with CT4
  • 4.5 amp Multi-Scale booster
  • Intelligent Auto-Reverse
  • Accepts AC or DC input
  • Over Voltage Protected
  • Auto-Resetting over teperature protection
  • Auto-Resetting over current protection for short-cicuit protection
  • LocoNet
  • Auto-Shutdown on loss of command control drive signal
  • Dual color LED indicates and diagnoses signals sent to track
  • Track OFF switch allows suspension of track power while input

  ...

  Go to post

• ---

  BXPA1 LocoNet DCC Auto-Reverser with Detection

  • Created by: Dudicrous
  • Published: 01-23-2026, 10:08 PM
  • 0 comments

  BXPA1 LocoNet DCC Auto-Reverser with Detection

  
  
  
  The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state information to LocoNet. The BXPA1 is silent solid state and uses no mechanical relays for auto-reversing.

  • Automatic reversing for one reversing section or sub-district.
  • DCC Occupancy Detection for 1 Auto-Reversing Section letting

  ...

  Go to post

• ---

  BXP88 LocoNet Occupancy Detector, 8 Detection Sections

  • Created by: Dudicrous
  • Published: 01-23-2026, 10:05 PM
  • 0 comments

  BXP88 LocoNet Occupancy Detector, 8 Detection Sections

  
  
  
  
  
  BXP88 makes adding detection and transponding to your layout easier than ever. No more complicated wiring!

  • DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section on your layout.
  • One Transponding Zone per Detection Section lets you know the location of transponder-equipped locos or rolling stock.
  • Intelligent Automatic short-circuit and over-current power management for each Detection

  ...

  Go to post

• ---

  BD4N DCC 4 Block Occupancy Detector

  • Created by: Dudicrous
  • Published: 01-23-2026, 10:01 PM
  • 0 comments

  BD4N DCC 4 Block Occupancy Detector

  

  • Low-cost, High-sensitivity DCC block-occupancy detection.
  • Adjustable resistance/current detection section (DS) trip threshold.
  • 8A capacity, suitable for all scales and track wiring configurations.
  • Noise resistant and compatible with BDL168 sections.

  • On-board status leds for stand-alone occupancy and track power indication, expandable for optional LT5 or fascia mounted occupancy indicator leds.
  • Plug and Play connections to simplify setup. Can cascade Booster wires.
  • Isolated Occupancy

  ...

  Go to post

• ---

  BDL716 Block Detector

  • Created by: Dudicrous
  • Published: 01-23-2026, 09:54 PM
  • 0 comments

  BDL716 Block Detector

  

  • All plug-in connectors for simple and easy installation and service.
  • User defined as 16 DS reporting addresses in 1 to 2000+ DS range.
  • Easy setup with device Option Switches (OPSW)
  • Powered by 2mm DC jack, 8V min to 22V max.

  • Configured to operate with DCC booster power from; DCS52,
DCS100, DCS210, DCS210+, DCS240, DCS240+ Command Stations,
DB210 and DB220 boosters.
  • Can split into two 8-DS areas to operate from two separate boosters.
  • Optional Detection and Power status led connector

  ...

  Go to post

• ---

  SE74 Signal Decoder

  • Created by: Dudicrous
  • Published: 01-23-2026, 09:50 PM
  • 0 comments

  SE74 Signal Decoder

  ​​​​​

  • Fully connectorized installation.
  • Optional support for DCC 9-Aspect control mode, including Lunars.
  • Easy setup with Option Switches and LocoNet programming.
  • Configurable for four solenoid or four slow-motion turnout control.
  • 8 Input lines for local control and sensors.
  • 8 System routes with 8 entries each.
  • Advanced LocoNet configuration capability with Series7 style installation support using a DT602.

  ...

  Go to post